Wiper motor hookup – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 1 reply, 2 voices, and was last updated November 7, 2007 at 3:41 pm by mikephillips.

Viewing 1 reply thread

Author

Posts
- November 7, 2007 at 12:34 am #57046
  Tony & Kyle Malone
  I have a new(used motor) the wiring diagram shows the colors for the car but the wire color on the motor has two white and one red (so it seems) but the diagram does not show which wires hook to which. Can any one give me some help? Thanks. Tony
- November 7, 2007 at 3:41 pm #61662
  mikephillips
  It’s not unusual for the colors to fade. Remove the two through bolts/screws and carefully remove the base of the motor. The portion of the wires inside the case normally retain their original colors. The motor itself won’t come apart when you do this as long as you hold the other two pieces together with your hand since there’s nothing attached to the inside of the bottom cover. Or if the wires have a protective cover over them on the outside you can peal that back and see.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.