Windshield Replacement – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 0 replies, 1 voice, and was last updated May 9, 2010 at 5:46 pm by paul-a.

Viewing 0 reply threads

Author

Posts
- May 9, 2010 at 5:46 pm #57530
  paul-a
  Hi all:
  
  I just installed a new windshield in my 64′ Tiger clone. I was able to do the replacement w/o taking the windshield frame off the car. Once the weatherstripping and mouldings were removed it was an easy process to remove the glass and gasket from the frame. The new gasket and glass were installed by "roping" them in. The whole process from start to finish was less than two hours.
  
  The gasket surrounding the glass was still very pliable and I am sure this helped the replacement go as easily as it did. An older, stiffer gasket might not be as easy to work with.
  
  So, for those of you who may face glass replacement in the future, even though the shop manual does not address this issue, it is not a difficult procedure.
  
  from sunny South Dakota
  
  Paul
Author

Posts

Viewing 0 reply threads

You must be logged in to reply to this topic.