- This topic has 2 replies, 2 voices, and was last updated March 30, 2023 at 2:08 pm by
.
-
Posts
-
-
my car needed new tires this spring so I decided to install an aftermarket TPMS system. I wanted one that had the sensors in the wheel not screwed on to the valve stem. On line the system I found had the in car monitor that was made to go into a blank dash knock out. they offered different ones specified for different car dash knock out sizes, I chose a toyota one because it was the smallest. I made a bracket to mount it next to my radio consul. Mounting the sensors in the wheels when I mounted the tires was easy, and the monitor in the dash only needs power and ground. instructions were good and sensors were pre programed to the monitor, I did adjust the low warning pressure, set my pressures and it read the pressures and temperature without even driving. no pix offered, can’t load to this site.
-
-
Forgot the photos. Here they are.
-
- You must be logged in to reply to this topic.