All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below
-
-
Do the tigers use the same temp sender as all the other early small blocks or is the resistances different?
Anyone know what the resistances should be at room temp to use with the stock guages.
-
See my Gage article at:
http://www.tigersunited.com/techtips/Br … Gauge1.asp
That has everything you might want to know about the the gages and senders.
The short answer is that you need the right Lucas sender to work with the original Sunbeam gages.
Stu
-
Do you have any data on what the sender’s resistances should be?
-
All the data I have is in the tables in the article. Extrapolate from the curves, and you will see it’s probably fairly high, 200, maybe 250 Ohms or more. I don’t recall ever measuring a room temp sender, though since it’s a temp sensor, the reading would depend on the temp of the room…;-)))
Stu
-
Oops sorry, I didn’t notice there was more than one page. 😳
- You must be logged in to reply to this topic.
.
