MKII wheel arch molding – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 3 replies, 4 voices, and was last updated March 28, 2014 at 1:55 am by Ron and Cathy Stein.

Viewing 3 reply threads

Author

Posts
- March 5, 2014 at 4:07 am #58128
  Gilles Boudrias
  Participant
  MKII molding 5,000$ Canadian 4,512$ Us today no reserve
  Anxious to see how much they will go for !!!!
  
  I bought my MKII for less then that in 1985
  
  http://www.ebay.com/itm/Set-of-4-Origin … a1&vxp=mtr
- March 5, 2014 at 2:24 pm #65525
  Eric and Bonnie and Bonnie Gibeaut
  Participant
  I am wondering what they will sell for too. And with about 4 inches missing from both front trims how will the new owner fix that?
- March 6, 2014 at 3:36 am #65526
  Bob and Jean Webb
  Participant
  eric,
  these moldings may be the ones that were on the alpine fastback starting in 1970. if you remember there is a set on my white car. the old guy that installed them has told me he used to have to add to them to fit the tiger. other than that they are the same and were readily available from dealers.
- March 28, 2014 at 1:55 am #65560
  Ron and Cathy Stein
  Participant
  My brother chopped the front of the wheel arches the same way in 1968 on his Mk2 in order to fit his fatter tires on the front without rubbing.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.