Expansion Tank Question

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 1 reply, 2 voices, and was last updated November 12, 2007 at 5:10 am by adventurer-96.

Viewing 1 reply thread

Author

Posts
- September 4, 2007 at 2:51 pm #57012
  Anthony & Susan DiBattista
  Hi All,
  
  The Expansion tank on my Tiger has sprung a leak at the overflow hose connection.
  
  I want to drive it to the Crab Feast (3 hrs one way) and have sealed it from the inside with hi temp and pressure silicone.
  
  First question is do you think it will hold.
  
  Second question is what is the permanent fix? It looks crimped and is the overflow tube under the cap.
  
  The thing that sucks is the tank is beautifully chromed.
  
  Any help would be appreciated.
  
  Best Regards,
- November 12, 2007 at 5:10 am #61673
  adventurer-96
  How did this work out?
  
  I don’t have an answer for you on the refit, as mine was brazed/soldered in place, and it’s flat black – didn’t want to do the chrome route in the engine bay.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.