Clutch and Brake Pedals – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 1 reply, 2 voices, and was last updated April 15, 2016 at 2:14 pm by mikephillips.

Viewing 1 reply thread

Author

Posts
- April 13, 2016 at 4:15 pm #58425
  Armando Pelaez
  Participant
  I have a 65 mk1 tiger which is missing the clutch pedal. What clutch pedal ( and Brake pedal ) can I substitute from another Alpine or Tiger?
- April 15, 2016 at 2:14 pm #66506
  mikephillips
  The brake pedal from any series 3-V Alpine will replace the Tiger brake pedal as it is the same, other than the changing shape of the pedal pad across series. The clutch pedal will work as well to replace a Tiger clutch pedal but be aware that since it mounts a little lower on the firewall the pedal pad will hang a bit lower, which may or may not be an issue for you. And the Alpine 3-V pedal assembles for the brake and clutch are interchangeable since they’re the same.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.