Dedicated to the preservation, restoration, and enjoyment of all Rootes Group Vehicles
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 
I’d use either the super pro a-arm bushings of the poly ones that Sunbeam Specialties sells. The original metalastic ones are difficult to install and you can quite easily bend the control arm. I made spacer bars for the upper and lower a-arms out of 3/4″ thick solid square stock so I wouldn’t bend the a-arms when pressing in the new bushings.
The a-arm bushings have zero impact on Ackerman angles… that’s a steering issue.
