TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

March 13, 2023 at 7:09 am #98003

James Lindner

Keymaster

The LAT 9 wheels use a shank type lug nut. The issue is to make sure the shank is the correct length

The guy who sold me the LAT 9s sent me photo of what he was using. He said the shank was 13/16” that is about.81”

I do not know what the measurement is for my LAT 70 lugs because they are on the car and have not had an opportunity to remove one.

I do have another set of lugs with a shank length of .74. I tried one for fit and the bottom of shank looked flush with the inner surface of wheel. So fit looked good. I will measure my LAT 70 lug and try it on for size.

Thanks
Jim