Ron and Cathy Stein

    I have been poking around the internet this morning without much success. The Tiger Parts book doesnt have a Ford part number for the clip. My theory is that Cobras should have a similar clip, as they have a similar set up with I think may be the same slave cylinder moving a Ford fork. Unfortunately I haven’t found anything yet. You would think that the Shelby guys may have shown Rootes how they arranged their setup. I did come across this Mopar clip that may work with some modification, or additional wire. As Tom says, some MacGyvering would be required. https://www.summitracing.com/parts/cwa-4338855?seid=srese3&gclid=Cj0KCQiA6rCgBhDVARIsAK1kGPIB8emb6IFtp00BD50iqbCxhFnBQb3eKhqR1J74tvSNyU0X8lvx-ecaAsE2EALw_wcB