I have had 2 sets of headers on my car, one set came on it and a replacement set I put on, both I believe are from SS. The #3 and #7 tubes hang low and scrape the ground all the time, I will saw my car is slightly lowered by about an inch..I believe the CAT design has the two lower tubes parallel to the ground and side by side thus tucked up a little better, this is info I got from the TIGER LIST. At present CAT doesn’t have these in stock.. I have had my stock manifolds jet coated and am thinking of installing them and forgetting the headers all together. I run stock exhaust so I’m probably only loosing a couple horses anyway.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 