Dedicated to the preservation, restoration, and enjoyment of all Rootes Group Vehicles
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 
The mounts have a short ear and a long ear with the holes that attach to the block. When installed on the hanger, the short end side should be forward.
Gene
PS: You might want to consider drilling some countersunk holes on the face side shown and putting some 5/16 reinforcing bolts through the rubber pad. Use Nylock nuts on the other side only snuggly tightened. Pics are in http://www.tigersunited.com website article on building a 350 Lunati motor by Tim Ronak. 🙂
