Re: Alpine Series II Soft Top install – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

July 5, 2011 at 8:53 am #64127

alpine-64

Participant

John,

On a series II there are not meant to be snaps on the body. The top secures to the hood bow just near the pivot point above the B post with a tennex fastener. You should see a small hole near the point where the 2 bowes pivot where the stud goes.

As for where the top secures to the body around the rear, there are 3 metal retaining strips that go around the rear wings/valence. The large rear one goes over the top and secures it against the body and rubber seal. Make sure you DO NOT secure the top under the 2 side strips or you wont be able to fold it down. The top is only secured behind the long rear piece.