No the balljoints stay in place-you just have to pop the tie rod ends off the steering arms on the wheel hubs using a tie rod end remover tool or a "pickle fork". The radiator stays in place too.
I cut off the stock rubber boot clips and used hose clamps to hold the rubber boots in place.
Thanks for posting photos of your Tiger! My favorite color too-is that the original paint? If so try and keep the car as a survivor-there are too few of them left….
Eric
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 