Thanks Eric
I now have that info and I will be using the Tiger mount.I’m not mounting the tranny ala tiger.That is welding the mount to the frame.I’m using 1/4 plate on the bottom plate of the crucifix with 1/4 plate on top. Because I haved moved the engine and tranny back the stock tiger mount would not be a good solution.This also has its problems such as the tranny mounting bracket has to have room but I have overcomed them.The problem with the stock Mustang mount Had the bolts below the 1/4 inch plate leaving them exposed.
8) AHHH life is so sunny.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 