Robert
I am not familiar with the Eastwood tool-I will check out their catalog later. Our cars use double bubble flares and if the Eastwood tool can make those, that is the correct type. The other style flare ends will not seal up correctly to the wheel cylinders, calipers, and master cylinders-I have learned this the hard way over the years. Check out http://www.minimania.com. I believe they sell generic brake lines with fittings and the correct ends. You may also try http://www.minicityltd.com They are closer to you-located in upper NY state. They may also sell the correct brake flaring tool set. Eric
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 