Re: Dipstick tube and oil dipstick – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

January 2, 2016 at 4:36 pm #66408

Gene Sokolowski

Participant

Mark1A,

Thanks for the heads up. I had not read the December issue yet.
I looked up Ron’s info in my 60-64 Ford Parts and Accessories books.
C2OZ-6754-A – tube oil level indicator – without 40 or 60 Amp Alternator, includes bracket – approx. 15.83" developed length. It was used on the 221, 260, 289 and 289 Special in the Ford, Fairlane and Falcon.
The C3OZ-6750-B (is the dipstick used with the tube above) 22.48" shield to full, 23.32" shield to add, and 24.44" shield to end.

Thanks again,
Gene