I just spent two days installing a remote oil filter adaptor and a oil cooler.
I mounted the oil filter behind the drivers side headlight and the oil cooler is about 3" diameter and about 36" long and i mounted it to the bottom of the front frame rails. Wish I had a oil temp gauge to see if it made any difference but thought it has to help some.
You know the old saying about measuring twice and cutting once well even when i measured twice I still screwed up a couple of times but its all in and not leaking but everything is just so tight!!!!!!!!!!
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 