Clipped to the jack still ends up going through sheet metal. I personally have not had a problem over the years with both the Alpine and Tiger grounding to the sheet of the battery box and rear trunk bulkhead. I will say though that I welded a nut to the axle side of the trunk bulkhead to provide a bit better contact area and prevent the possibility of it pulling loose. And even with a heavy duty battery no problems have been seen
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.