Thanks for all responses. I do not have the upper mount bracket but I see where the mount was on the firewall. The lower bracket I have mounts on three holes on the servo valve body and has 2 mount holes at the bottom. It looks like this is what TT is describing is in the second picture. So do I have the wrong lower mount bracket or are there different styles by build date ? Just a note here. I found out that the servo in my car now is a 1956 Ford or Tbird servo. They have cut the original lower bracket and modified to mount the Ford servo. It actually fits in there pretty nice and until I started looking at pictures I didn’t know it was the wrong servo. It is using 2 mount bolts to the body also. Any more information would be appreciated. Thanks in advance.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 