Dedicated to the preservation, restoration, and enjoyment of all Rootes Group Vehicles
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 
It all depends on what carbie you have installed… If you’re running a factory 2bbl autolite, then you’d use the OE Rootes throttle cable bracket. If you are running an F4B or similar intake with a Holley 1850, then a different throttle cable bracket is required. The OE bracket has the wrong angle and will bind and not allow the carb throttle plates to close… Regardless of return spring pressure
I can supply a template for the 4bbl throttle cable bracket
