TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

December 5, 2023 at 8:51 pm #99769

Michael Hartman and Donna Bissey

Participant

Hi George,

Your comment about early and late senders got me wondering. I’m an Alpine guy … the same temperature sender was used for Alpines from series 3 to 5. I am assuming the Tigers used the same temperature gauges as the series 4 & 5 Alpines. Those work based on thermal heating. If the same temperature gauges were used on Tigers, the VDO part should work as I described. You also need to have a voltage regulator in place. An original voltage regulator cycles the power on and off to generate an average power that is equivalent to a constant 10V. Or use a use a modern solid state voltage regulator that puts out a constant 10V DC.

Mike