Were using 24" both front and rear to the fender lip, this is with 15 " wheels and a 225/50rear and a 205/50 front tire
you can use a lowering block in the rear to get the ride height, you can also remove the rubber isolater to lower the front if you do that you need to put a
thin delrin shim (as we have done in the past)to replace it. you also need to look into the length of the front springs stock is 12.0" free 335s 11.5"
450s 11.0 etc etc etc. the off set bushing in the rear spring can be replaced with a straight one wich will lower the car also, some folks say this has an adverse effect on the handling we saw no differance on the Tiger we had. food for thought!
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 