Information from users of Rota wheels – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 0 replies, 1 voice, and was last updated February 5, 2025 at 5:34 pm by John Davis.

Viewing 0 reply threads

Author

Posts
- February 5, 2025 at 5:34 pm #102245
  John Davis
  Participant
  I am in the process of ordering a set of Rota wheels for my Tiger. I have two recommendations of using 15×6 with a 25 mm offset for the front with 195/50 or 195/55 tires. For the rear 15×7 with a 25mm backspace and 205/50 or 205/55 tires.
  The vendor has 15×7 30mm backspace. one of the recommendations indicated they have about 1/2″ clearance to the rear springs with the 25mm. the wheel with the 30 using a 1/4″ spacer would give me that clearance.
  The vendor indicated he’s sold may of the 15×7 20mm wheels to Sunbeam owners and that they are asking about them now. So, I need to kind of poll the owners of Rota wheels to see what offsets (backspace) you are using, and what kind of clearances you have.
  I would also like to find out what size tires and manufacturers you are using. The car will be used for normal driving, no auto crossing etc. It has stock suspension. I did have the rear fender lips cut down to 5/8″ for more tire clearance.
  Thank uou
Author

Posts

Viewing 0 reply threads

You must be logged in to reply to this topic.