Reply To: 351W motor install into a Tiger??????

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

May 30, 2005 at 6:12 pm #59316

barry-knight

The 351 Windsor is from the same engine family as the 260 / 289 / 302, but it has a deck height of 9.480″ – 9.530″. That means the 351W is almost an inch taller and 2 inches wider than a 260 / 289 / 302 with a deck height of 8.206″.

The 351 Cleveland (part of the “335” engine family) has a deck height of 9.206″ and is therefore not quite as tall or wide as the 351-W, but the heads have BIG staggered valves and are considerably larger.

Both the Windsor and Cleveland are 90 degree engines.