Hi Jim. Don’t give up! Chances are the seals in the master cylinder or the slave cylinder are worn out. Did you take the bleeder screw out of the slave cylinder to see if fluid comes out when you pump the clutch pedal? It may be that the bleeder screw is plugged up or the passageway leading to it if no fluid came out of those. Was there brake fluid on your floorboard under the clutch pedal? If not it all leaked out the slave cylinder over time again pointing to a bad seal. Do you know Tiger Tom? He lives fairly close to you as does his mechanically gifted son in law. Hopefully they will chime in and contact you or another member living near you. Or send me a PM and I will send you my phone number.
Eric
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 