September 13, 2011 at 4:00 am
#64227
the strap rivets to the indentation in the front header rail. cover the rivets with something like a good duct tape to prevent them from wearing thru the top. my series 4 originally had a cloth tape to cover the area. the strap rivets to the bottom of the center bow using the metal piece formed to fit the bow and then wraps over the top of the rear bow and rivets to the bottom of the rail using another piece like the one on the center bow. if you rivet the straps on top of the two rear bows you run the risk of the rivets and the metal retainer tearing the top material. series 4 and 5 cars only use one strap down the center.