i take the booster apart and weld plugs in the cylinders and also make sure all other openings are welded up except for where the brake lines attach. then just assemble the empty can to the housing, mount it where it goes and hook up the brake lines. i use the .700 master from series 2 alpines. i usually buy them from pegasus. all of my alpines have this setup. i’m working on doing the same thing to the clayton dewandre booster on the harrington we bought a few months back.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 