if i’m removing the tanks i usually remove the trunk springs and then remove the bolts in the wheel well, then remove the bracket at the back. then i loosen the clamps at the tanks and then remove the tank, leaving the hoses on the cross tube. on the right side you need to remove the gas cap and the rubber filler hose to remove the tanks. then loosen the clamps holding the angled tubes and remove them. to remove the cross tube you need to loosen and remove the gas line fitting. then lift it out. we always replace the hose since you need to do some prying if they are the original hoses.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 