The fittings are the same but the flare on the end of the brake line is what is called a bubble flare-it is convex instead of concave on the end. These lines are available from British parts suppliers in generic lengths and you can bend them to fit or you can buy the correct flaring tool and make your own.
http://www.apexinds.com/mm5/merchant.mv … gory_Code=
Good luck. Eric
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 