Don’t have a photo, but here’s a description. It’s the part formerly sold under the Ford SVO line, not the Econoline piece. Angled back about 45 degrees from vertical so as to clear the crossmember, and using stock exhaust manifolds. Using a regualr size filter works ok, but I did find I needed to put a small dent in the oil pan, not for the filter but to be able to get a filter wrench on it.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 