Re: Pictures of new Tiger – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

July 19, 2010 at 3:15 pm #63594

Jeff Nichols

Participant

"The BON mentions a gain of 40 horses with the F4b setup, so maybe
approx. 200 at the flywheel translates to about 135 at the rear wheels?"

A Tiger email lister said he was able to get 278HP out of a 260 by using 4bl carb, high rise manifold and street roller cam ( also roller rockers) with screw in studs (revs up to 7000rpm). By the way, Edelbrock electric choke carb and F4B manifold. He may have been able to get 10 – 15 HP more if he used a current Edelbrock high rise like the RPM manifold.

I recently built a 260 with street roller cam, roller rockers, roller timing chain, F4B, Edelbrock carb, and heads with porting and slightly larger than stock valves. My goal is 275 – 280HP.