You need to reinforce the whole crossmember and check it for sag and any cracks in the steering mount tabs that hold the rack! If the crossmember is saging you will noitce that the upper folcrum pin rear nut will be aginst the inner fender. If you need to aline the crossmember you need to talk to Doug Jennings at Tiger Auto. Good Luck
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 