Are you using the AMC tailhousing on a Ford style T-5 ?? If so there are a few mods to do… the Ford spline yoke will not fit properly without removing the AMC bushing, installing a custom sleeve and then a ford bushing… Also the speedo drive gear will have to be relocated on the output shaft to line up with the AMC speedo housing. The T5 drive gear will not mesh properly… I used a drive gear from a 700R4 and epoxied a shim under it . I couldn’t get the right ratio so I have a right angle ratio adapter to sort it out. To make a speedo cable, I cut about 2 feet off of the stock Tiger cable ( trans end) and grafted on a new end . I installed this to a lakewood with a CPC adapter. It actually rotates the trans about 5-6 degrees to the left … I also bought a custom Hurst shifter with a handle that offsets 1" back and left… perfect!!
I have details and pics of all this at home but am on holiday until Mar. 1
E-mail me @ jim@island.net and I can send some more detail and pics…
Jim