Reply To: Temperature Sender Options – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

December 23, 2008 at 3:53 am #62727

Tom and Joanne Ehrhart

Participant

I was never able to find an alternate Temp sender unit in all the years I was in business. Yet I suspect there are some with the same electrical characterisitics with different thread sizes than what we use in a Beam. These would be Brit cars in the mid 60’s with gauges that used the instrument voltage stablizer (regulator) that supplied the bi-metal thermal gauges like we have in our Beams. These were popular gauges used in many Brit cars. The faces may be different but the internals are the same.

Some of the sender units I had seen had smaller diameter threads
than what we use on our Beams. If that is your mssion, keep looking. Bet you will find one.
Merry Christmas………………..TT