Not familiar with them. Been too removed from performance items these days. The bell crank approach for load transfer is an interesting approach for dynamic loading of the chassis. One thing I can say with certainty, better reinforce the front spring perch area where the rocker, cross member and wheel arch frame pieces converge. If you don’t you will have more to worry about than rotating axles.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 