Reply To: what is the ‘brace’ refered to in the cooling article?

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

June 18, 2008 at 12:12 pm #62300

Owain Lloyd

i’m not sure provides much if any support. maybe replacing it with a length of steel rod would be best. this would cut the area and still offer the same rigidity to the side pieces. mine is a fairly meaty 302 which is currently out so now is the time if i’m going to do anything with this.

i have to admit that i don’t suffer from cooling issues once i’m moving but it overheats in traffic. i don’t have a fan or shroud and haven’t blocked the horn holes yet though so its fairly obviously going to overheat with no airflow!