A 7/8" cylinder has about twice the surface area as the 5/8" one, so for a given amount of pedal travel you will pump twice as much fluid volume. You will have to be careful to not depress the pedal too far because you could pop the slave cylinder right out of its bore – assuming you didn’t run the release lever right to the end of its travel and bend something in the bellhousing first.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 