Regarding high output alternator installations: Here’s a quick reference for what size of wire you should consider in any ‘upgrade’ to your wiring harness.
http://www.kayjayco.com/techPractical.htm
It is also essential to protect your wiring by using a fusible link or high-power fuse at the alternator terminal. That way, if you ever get a short or other electrical fault, it will melt the fusible link or blow the fuse and prevent the entire harness from overheating.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 