They do tend to develope a bow in them, measure across the shock towers to see. If you can’t get a good set of dimensions from one of the local companies I may have some at home. And they also d fatigue crack, check for those around the welds and in the virtical areas on the ends. I know the guy who did mine several years ago welds in some reforcements but I don’t have a diagrahm showing exactly what he did.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 