hi all i think that the reason the ford racing guy said to use the tiger water pump was because of the clearance issues..and belt alignment..if you have found that the later mod water pump will fit ..please post the part no. and or year and model of the car it is for.. with the stock tiger rad in my tiger and the short snout water pump i only have about 1/2 inch between the fan and rad. and this could be a greater problem with the griffin rad . i think the motor is too far forward due to the after market motor mounts being a little off with the mounting holes.and no they were not reversed.( as they can be reversed .they are spifis rt and left side) and then produce an even greater problem) i intend to do a little re-drill and grinding and see if i can get the 302 to sit back a little further. thanks earl blu oval
Forums
All posts, newest on top


In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below