Dedicated to the preservation, restoration, and enjoyment of all Rootes Group Vehicles
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 
Chuck,
I have the Hillman spindles on my SV, with a set of S3 springs the car with the V6 in it is still pretty high but teh front end has not had a chance to settle and being the engine is now in my S3. On my S3 it is pretty low think the car has had the rubber insulators removed and maybe the spring cut, a coke can will just fit under teh crossmemeber.
I am pretty sure the front end under the SV is going to get put in the S3 along with the Tiger rear end.
