Hi, welcome to world of sunbeam. To your questions the balancer should work if you use the stock Tiger pully, the pullies on the Tigers were from a Ford forklift,hard to find any thing else it will hit the rack. The water pumps are common all but the fan hub will have to be pressed off and turn it over a press it down close to the pump body, so the pully will line up and it needs to be early Ford, like 64 SB stuff. The bellhousing if you have the stock motor will be early Ford 5 bolt, late 65 and up Ford SB is all 6 bolt, see the problem! 8)
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 