George
The spacers were for the Lister before the front end redesign and I never did use them.However these were meant for the frame to crossmember and not for the springs. I don’t believe in spacers on the springs of any nature.They are frame wide and 12 inches long made of aluminum.They also were made to be pegged to the frame at both ends.They then would have been between the frame and cross member.If I was to use them which I’m not I would have to get a longer shaft for the lower steering shaft.Right now they will be used for another project as I do need some aluminum 1 inch thick
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 