if you remove the horn ring you will find that you probably need to adjust the gap between the horn ring and the ring behind it .there should be springs between the two.back the nuts off until you have a small gap between the two.then when you push the horn ring the two make contact and the horn works.if they touch all the time , the horn will blow all the time.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 