The vacuum diaphragm is sticking in its boor, I would take the vacuum piston out and check the quality of the leather then I would polish the boor of the vacuum can.With some of the rebuilding kits the rubber that sits behind the leather is too thick this makes the piston too tight, to rectify this you need to slice the rubber in half and reinstall it back behind the leather so the piston is not as tight.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 