Bill
You may be right as to the 69/71 Alpine fastback coupe.The engine mounts were positioned to have the engine slanted and were different than the 59/67 Alpine.The 59/67 Alpine mounts were basically at the front while the coupe were mounted on the side of the block near the front.They sat on sort of a stalk like post.
There should be machined holes in that area.I can’t give specific as memory on this one is old.The 69/71s did have the finned Alloy pan.I can’t remember if it was an option or stock item but it is a desired item for the 59/67 Alpines as it is a direct bolt on.
Some where out there is a engine list as I did see it once upon a time but again the memory on this is lost.It has been a long time since I worked on one.
Hope this helps a little.
8) Did I mention how sunny it is?
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 