Hi Frank
First it was “Its a snap” kit I bought on Ebay.As they all seem to be based on a GM coded wire and fuse block and it seemed OK. As mention I like lots of circuits.I did solve the brake lights after REALLY reading everything on the sheet.Its like small print to one side.It stated that the brake switch wire”2of them” on some GM cars are or can be used as to the brakelights.Thats seperate brake lights from the signals.Funny how time dulls things as I ended up using sperate signal lights on the Lister which was probably something like I encountered with this.I do have a Mustang column in the lister.It does have the 3rd brake light wire so I will in all probability end up with a 3rd brake light.
I still have the gauges and switches to wire.I want something different than stock but not sure as to what I want so when I do it should be easy to hook everything up as all wires needed are at the top.Just need the dash to cut to length and connect them.
It might get to be slow progress as I bought a car for my wife and it was sort of an impulse buy.I hope it is as good as it seems.Once its here I will probably say something about it.So far BIG SECRET but its the kind of car she has said she would like for the last 30 years.Right its not a Sunbeam
8) AHHH life is so sunny
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 