Paul,thanks for the info.My Series 5 and Tiger II are basically stock vehicles.However,the Alpine was rewired after an engine compartment fire in the mid 1980’s.My cousin was over from Ireland and he rewired the entire system thru and including the dash area using standard automotivewire of various colors[we didnt have access to the various Lucas dual color wire stock].He did a great job but it still has but the two fuse setup.Is the EZ wire marked repeatedly on each wire…to make it easier to install?I’d probably elect to do the Alpine first removing the windscreen and the dash pad cover which needs replacing after 40 years.It is probably the only way to install replacement wire behind the dash based on my limited experience in working on the wiring in that area.My cousin must have been a contortionist.I won’t get to it until the Spring of 2006 so feel free to give a progress report with your endeavor.The Sunbeam Specialities catalog shows various electical switches and parts that are somewhat unique so I wonder how EZ or Painless woud provide directions as to those. frank mooney
Forums
All posts, newest on top


In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below