November 22, 2005 at 10:02 pm
#60089
quote Tigger:
Chuck
Did you double check your ground strap from the motor before pulling out the starter? Although a short is possible, a faulty ground can also appear especially if the bench test was successful. (been there DOH!)
Barry
That is a good link, time to get out a credit card. Has anybody tried a modern/pygmy starter for the small block?
Tigger
Barry
That is the very first thing I thought of but it was only sparking with direct current
I even grounded the starter direct.I pulled it out but haven’t removed the pan as yet.Again grounded direct and full 13.2 volts with the same results.
I have ordered a starter of Ebay as there are some good buys for this style of starter.